Contact us

Camprofile gaskets.webp Camprofile gaskets.webp

Camprofile gaskets

A virtue of a camprofile gasket is its first-class wear endurance, temperature fluctuations and high-pressure shock resistance.

The camprofile gasket is outstanding in its excellent compressibility and recovery ability thus it is widely applicable in various industries.

The gasket frame is made from stainless steel and the structure achieves a great sealing in low surface pressure circumstances.

We manufacture the camprofile gasket according to the EN, ASME and GOST standards as well as fully customized based on your drawings or measurements.

FAQ

What materials do you use in cam profile gaskets?

The core material is typically stainless steel EN 1.4404 (AISI 316L) and surface layers are graphite. However, depending on the application we can propose other material combinations as well. Just as an example you might want to use EN 1.4541(AISI 321) core material and instead of graphite surface layers PTFE would seal your media better.

Basically, there are at least a fistful of material combinations to choose from.

Why would I choose a camprofile gasket and not a spiral wound gasket?

There most certainly is a need for them both. The greatest benefit of using camprofile compared to spiral wound gasket is its sealability with lower surface stress. When spiral wound gasket requires a lot from bolts and flanges, the camprofile will seal with less demands.

What is the maximum and minimum temperature resistance for a camprofile gasket?

Temperature resistance depends totally on the material combination. PTFE only covers temperatures from cryogenics to +260°C and graphite up to 500°C. Then again by choosing high temperature resistant alloy core and vermiculite-based surface layers it can almost reach +1000°C.

What is the maximum pressure for a camprofile gasket?

It again depends on materials, flange arrangement, bolts, installation, and many others but as a rule of thumb camprofile gasket works well up to 250 bars.

Use case examples

You can use camprofile gaskets in many different applications. To give you a better idea, we’ve featured use case examples below from an Oil refinery and A Cruise Vessel.

Oil refinery

Oil refineries used to be full of double jacketed gaskets made of various alloys most commonly low carbon steel.

Have you ever thought about why on earth would someone try to seal metal against metal?

So did the maintenance managers in the refineries. Double jacketed gaskets were refurbished by adding graphite layers on both sides of a gasket.

That was one way to make a decent seal. So, the customer had a brand-new gasket but needed to repair it before using it. For sure not time well spent.

Today the majority of the double jacketed gaskets are replaced with a camprofile gasket. Especially as a heat exchanger gasket it has proven itself time after time.

You as our customer just need to peel the gasket of its wraps and it will be ready for tough action. The best proof of camprofile gaskets functionality is an old refinery and its old heat exchanger; you cannot find a splash beneath it!

Cruise vessel

With our own eyes we have seen an engine room in a huge cruise vessel where staff needed to wear respirators when taking care of their duties.

TTG was called in to solve the issue with the leaking exhaust system. Our specialists went in, took pictures, measures, and application details, and took them back to the office.

Our design board saw this case as an interesting challenge.

After gathering all relevant data, the best possible solution was innovated; a very special camprofile gasket with a unique geometry following exactly mating parts of the sealing surfaces and flange geometry!

The surface area was reduced to meet the right gasket stress with the given bolt load. Should you ever need a camprofile even with a very special design and geometry, do not hesitate to contact our innovative sales staff.

Order your Camprofile gaskets now

Contact us

Our sales personnel are happy to help you.

TTG news, stories & updates

Read the latest news, behind the scenes stories, Smart Blog posts, and more below.

People
#
5 Nov 2026, 14:35

Sanni Kraneis began her career at TT Gaskets in autumn 2018 as a part-time office assistant…

→
People
#
22 Oct 2026, 15:27

Iida Smolander joined TT Gaskets in March 2022 as a Sales Coordinator Trainee through a staffing…

→
News
#
17 Aug 2026, 08:25

TT Gaskets had the pleasure of welcoming Peter Ericson, Ambassador of Sweden to Finland, together…

→

Follow us